Fence Painters in Cheltenham

Fence painting in Cheltenham by Cheltenham Decorators, brush applying stain to wooden fence panels

Fence painters covering garden fences across all property types in Cheltenham. Cheltenham Decorators treat timber panel fences, close-board fencing, and garden gates using quality exterior stains and protective coatings.

Timber fence panels treated in sequence, rails and posts as a complete unit
Close-board fencing worked into all overlap joints to prevent rot entry
Garden gates treated off their hinges where possible, both faces covered
Quality exterior wood stains in a full range of tones from natural oak to charcoal
Fence and shed combined in a single visit for consistent finish and better value

Call 01242 503600 today for a free quote.

Get My Free Quote

Fill in the form below for a free quote:

This field is required.

I agree to the Terms and Conditions and Privacy Policy

This field is required.

Why Choose Cheltenham Decorators

Garden Specialists

Timber treatment and weather protection for fences and outdoor structures.

Clear Pricing

Fixed price from the first quote with no unexpected additions.

Fully Insured

Full public liability cover on every job.

Highly Recommended

Most of our work comes from repeat clients and referrals.

Get My Free Quote

Speak to a local fence painter today

01242 503600

Contact Form

Fence Painting Services in Cheltenham

Timber Fence Panels

Lap panel fencing is the most common garden boundary in Cheltenham. Properties in Charlton Kings, Battledown, and Bishops Cleeve typically have runs of 10 to 30 panels.

We work along panel sections in sequence, covering rails, boards, and posts as a complete unit. Penetrating stains are applied by brush to reach into the grain properly. Older panels that have weathered and greyed benefit from a wood brightener before treatment to open the grain.

Close-Board Fencing

Close-board fencing is built in place from vertical boards fixed to horizontal fence rails. The overlapping profile creates gaps that trap moisture if left untreated.

We apply preservative treatment from the top of each board down, working into the overlap joints. For close-board fencing in Prestbury and Charlton Kings, a solid mid-tone stain in grey, charcoal, or brown provides both coverage and long-term protection.

Garden Gates

Timber gates are exposed on both faces and wear faster than adjacent fence panels. Daily opening and closing works the joints loose and lifts poorly adhered coatings.

We treat gates off their hinges where possible. This allows full coverage of the back face and the bottom rail, where moisture most commonly enters. Hinges and bolts are masked or removed before treatment.

Fence Staining

Stain penetrates the timber rather than sitting on the surface. This makes it a better long-term choice for garden fencing than paint on most softwood panels.

We use quality exterior wood stains in a full range of finishes: natural oak, dark oak, charcoal, grey, olive, and black. Stain-finished fences typically need retreatment every 3 to 5 years.

Protective Coatings

For fencing bordering high-value gardens or boundaries visible from the street, we offer a premium protective coating rather than standard fence treatment.

These coatings form a flexible surface layer that repels water rather than absorbing it. The result is a finish that holds its colour and condition for longer than standard stain.

Tall wooden stained fence panel in Cheltenham garden

Decorative wooden garden fence freshly stained in Cheltenham

How We Paint Your Fence

1. Assessment

We check every panel, rail, and post for rot, split timber, and loose fixings. Sections that have failed structurally are flagged before any treatment begins.

2. Preparation

Loose flaking paint or old stain is brushed back. Weathered timber is brightened with a wood cleaner to open the grain. Posts are cleared at the base to check for ground-level rot.

3. Priming

Bare sections of timber receive an end-grain sealer or preservative base coat. This is particularly important on cut ends of boards and the base of posts.

4. First Coat

Applied by brush, working with the grain and into all overlapping joints. Roller application is used on flat surfaces for speed, always followed with a brush to work the product in.

5. Finish and Inspection

The finish coat goes on once the first is fully dry. We check coverage on posts, rails, and gate frames before signing off on every job.

Fence Painting Costs in Cheltenham

Prices below are estimates only. Call 01242 503600 for a precise quote.

Purple wooden garden structure painted in Cheltenham, exterior timber treatment

Fence Length and Height

Longer runs and taller fencing require more time and more product. Most Cheltenham gardens have 15 to 40 linear metres of fencing, and a standard rear garden with 20 panels will cost less per metre than a heavily weathered fence requiring preparation.

Timber Condition

Weathered or previously painted timber needs more preparation than new panels. Heavy flaking or rot adds time and material costs.

Standard lap panel fencing runs £8 to £14 per linear metre for two coats. Close-board fencing with prep and posts included runs £10 to £18 per metre.

Access and Gates

Fencing that backs onto flower beds or hard landscaping takes longer than fencing with clear access on both sides.

Timber garden gates cost £60 to £150 to prep, treat on both faces, and rehang, depending on size and condition.

For wider exterior timber work, see our exterior painting page. For shed and outbuilding treatment at the same time, see our deck painting and shed painting pages.

Fence Painting FAQs

How often does garden fencing need repainting or restaining in Cheltenham?

Stained softwood fencing typically needs retreatment every 3 to 5 years. Painted fencing may need attention every 4 to 7 years depending on the product and which direction the fence faces. South or west-facing fences weather faster. We advise on the right product and likely maintenance cycle when quoting.

Do you treat both sides of the fence?

Yes, where access allows. The rear face is often overlooked but is equally important for preserving the timber. Where access to the far side is restricted, we work as far in as possible and advise accordingly.

Can you paint fences that have already been treated with a product I applied myself?

In most cases, yes. If the existing treatment is well adhered, we clean the surface and apply a compatible new coat over the top. Where a previous product has failed, we strip or brush back before applying fresh treatment. We identify compatibility issues at the quoting stage.

Will fence treatment harm nearby plants?

Modern water-based exterior stains are low in volatile organic compounds and safe for use near established planting once dry. We take care to avoid direct contact with plant foliage during application. For work near ponds or with heavy-solvent products, we discuss protective measures at the site visit.

Is it better to stain or paint a timber fence?

For most softwood panel fencing, stain is the better long-term choice. It penetrates the grain and does not peel as the timber moves with seasonal moisture changes. Paint gives a more solid finish but requires more preparation and re-coating when it fails. We advise on the best option for each fence type when we quote.

Do you replace damaged panels before painting?

We can flag damaged panels during the assessment. If you want us to co-ordinate a fencer to replace panels before we treat, we can do that as part of the wider job. Alternatively, we proceed with treatment on all sound sections and leave the replacement decision to you.

Get My Free Quote

Fill in the form below for a free quote:

This field is required.

I agree to the Terms and Conditions and Privacy Policy

This field is required.